Bipods, tripods,
and monopods.两脚架、三脚架、
单脚架
Engineered bipods, shooting tripods, and field-support systems for precision, hunting, and observation platforms. Reference products and custom OEM programs are developed around mounting interface, height range, cant and pan control, leg geometry, load case, material, finish, packaging, and target cost—giving buyers a clear path from a proven platform to a program-ready product.面向精密射击、狩猎与观察平台的工程化两脚架、射击三脚架及外场支撑系统。标准产品与 OEM 定制项目围绕安装接口、高度范围、侧倾与旋转控制、支腿几何、载荷、材料、表面处理、包装及目标成本协同开发，让客户能够从成熟平台高效推进至可量产方案。
View catalog查看目录
Built for stable support—from leg geometry to final load validation.从支腿几何到最终载荷验证，确保稳定支撑
Support performance depends on how every mechanical interface works together. Leg tubes establish stiffness and height range, detents control repeatable positioning, pivots manage articulation, and the saddle transfers load into the host platform. Our manufacturing plan connects machining, surface treatment, calibrated assembly, and cycle testing to one approved product specification.支撑性能取决于各机械接口的协同工作。支腿管决定刚度与高度范围，定位机构控制重复位置，枢轴负责姿态调节，鞍座则将载荷传递至承载平台。我们的制造计划将精密加工、表面处理、校准装配与循环测试统一到同一份批准规格中。
Leg tubes and locking geometry脚管与定位组件
Outer and telescoping leg tubes are machined to the approved diameter, straightness, and running-fit requirements. Detent buttons, receiver pockets, and extension stops are controlled as one locking system so each position engages positively without excessive play.外管与伸缩支腿管依据批准的直径、直线度和滑动配合要求加工。定位按钮、接收槽与伸展限位作为完整锁定系统统一控制，使每个档位都能可靠咬合，同时避免过大间隙。
Saddle, pivots and articulation安装头与铰接
The saddle or head body is machined from the specified aluminium alloy, with pivot seats, clamp features, and mounting datums controlled from the drawing. Cant, pan, and friction mechanisms are assembled to the required motion range and resistance profile.鞍座或云台主体采用规定铝合金加工，枢轴座、夹紧结构与安装基准均依据图纸控制。侧倾、旋转与阻尼机构按规定的运动范围和阻力曲线完成装配。
Surface treatment and color control阳极氧化与表面处理
Type II anodizing supports sporting and appearance-led programs; Type III hardcoat is available for tactical and high-wear applications. Finish type, thickness or process requirement, masking, corrosion validation, and color standard are defined by program.二类阳极氧化适用于运动型及重视外观的项目；三类硬质阳极氧化用于战术与高磨损应用。处理类型、膜厚或工艺要求、遮蔽、耐腐蚀验证及颜色标准均按项目定义。
Controlled assembly and torque装配与扭矩
Leg assemblies, pivots, locks, and mounting hardware are installed on controlled fixtures. Fasteners are tightened with calibrated equipment, while detent engagement, lever timing, clamp travel, and articulation resistance are checked against the approved build specification.支腿组件、枢轴、锁定机构与安装五金在受控夹具上完成装配。紧固件使用校准设备锁紧，并依据批准的装配规格检查定位咬合、手柄时序、夹紧行程与转动阻力。
Load, cycle and release validation负载与循环验收
Static-load and repeated-operation tests are matched to the rated payload, use case, and acceptance plan. Post-test review confirms locking integrity, extension function, articulation, fastener condition, and permanent deformation before the lot or unit is released.静载与重复操作测试依据额定载荷、使用场景和验收计划配置。测试后复核锁定完整性、伸缩功能、姿态调节、紧固件状态与永久变形，确认合格后方可进行批次或单件放行。
Documented evidence for every production release.每一次生产放行都有清晰记录
Documentation is matched to the program’s risk profile and acceptance plan. Most support-system programs use lot-level dimensional, material, coating, torque, load, and cycle records; unit-level serialization and reporting can be added where the application or customer specification requires it.文档配置依据项目风险等级与验收计划确定。多数支撑系统采用批次级尺寸、材料、表面处理、扭矩、载荷和循环记录；如应用或客户规格需要，也可增加单件序列化与报告。
Lot dimensional report尺寸报告
Inspection records critical-to-function dimensions by lot, including leg-tube geometry, detent locations, pivot seats, and mounting-interface features.按批次记录关键功能尺寸，包括支腿管几何、定位位置、枢轴座与安装接口特征。
Load test record负载测试记录
Approved fixtures apply the programmed load and record the acceptance result, post-test function, and disposition at the required sampling or unit level.批准的夹具施加规定载荷，并按要求的抽样或单件级别记录验收结果、测试后功能与处置结论。
Cycle acceptance循环验收
Repeated folding, extension, locking, and articulation cycles are recorded with the post-test integrity check and release disposition.记录重复折叠、伸展、锁定及转动循环，并保留测试后的完整性检查与放行结论。
Coating qualification涂层资格认证
Coating records capture finish type, color, process requirement, masking, and the corrosion-validation scope defined for the program.表面处理记录涵盖处理类型、颜色、工艺要求、遮蔽区域及项目规定的耐腐蚀验证范围。
Assembly torque log转轴扭矩日志
Calibrated-equipment records confirm specified tightening torque, with lock function and articulation resistance verified for applicable assemblies.校准设备记录用于确认规定的锁紧扭矩，适用装配体同时验证锁定功能与转动阻力。
Bipods, tripods & field supports READY-TO-SHIP + CUSTOM BUILD两脚架、三脚架与外场支撑 现货供应 + 定制制造
A production-ready line of bipods, shooting tripods, heads, monopods, and mounting adapters. Order established SKUs, build a private-label range, or use any reference model as the starting point for a configured program. We also develop custom support geometry around the intended platform and load case—including height range, leg positions, cant and pan control, clamp interface, materials, finish, and packaging. Engineering, manufacturing, inspection, and logistics stay connected from approved specification through scheduled delivery. 覆盖两脚架、射击三脚架、云台、单脚架与安装适配器的可量产产品线。可直接采购成熟 SKU、建立自有品牌系列，或以任一参考型号为起点配置项目。我们也可围绕目标平台与载荷开发定制支撑几何，包括高度范围、支腿档位、侧倾与旋转控制、夹紧接口、材料、表面处理及包装。工程、制造、检验与物流全程衔接，从批准规格推进至计划交付。
// Quote Tools// 报价工具
Build quotes faster — paste SKUs or load saved templates更快建立报价 — 粘贴 SKU 或加载已保存的模板
SKU per line. Mixed delimiters supported. Hit ⏎ Validate, then ↪ Add to Quote.
格式:每行一个 SKU。支持混合分隔符。先按 ⏎ 验证，再 ↪ 加入报价。
What else we build.我们还制造什么
Build one support product or coordinate a broader field system. Adjacent programs can combine optics, mounts, rails, lights, lasers, and support equipment under one development and sourcing conversation.可开发单一支撑产品，也可协同更完整的外场系统。相邻项目可将光学瞄具、安装架、导轨、灯具、激光器与支撑设备纳入同一开发及采购流程。
Scopes瞄准镜
LPVO, MPVO, HPVO, fixed, crossbow.
→ View product familyRed dots红点瞄准器
Open, enclosed, tube, prismatic.
→ View product familyMounts & rails安装架与导轨
Rings, cantilever, dot mounts, accessory rails.
→ View product familyLaser sights & lights激光瞄准器与战术灯
Visible, IR, weapon lights, combos.
→ View product familyBipods & tripods两脚架与三脚架
Fixed, tilt, pan/tilt, monopods, tripods.
· Currently viewingConsidering a bipod or tripod program?考虑做两脚架或三脚架项目？
Share the host platform, intended use, target height and load, mounting interface, finish, forecast, and target cost. We will identify the missing decisions, recommend a reference or custom development route, and define what is needed for a useful quotation.请提供承载平台、使用场景、目标高度与载荷、安装接口、表面处理、需求预测及目标成本。我们将梳理待确认事项，建议成熟平台或定制开发路径，并明确形成有效报价所需的资料。